Commercial air curtain FM-3012B China Wholesale Air Curtain Industrial

CENTRIFUGAL AIR CURTAIN - STRONG AIR WALL

* All metal spraying with better fire prevention, corrosion resistance performance;

* Multiple control methods, such as manual switch, IR remote, magnet switch and door sensor, multiple control modes are available to satisfy different requirements at different places

 

  • Item NO.:

    FM-3012B
  • Order(MOQ):

    1
  • Payment:

    EXW
  • Product Origin:

    CHINA
  • Color:

    White
  • Shipping Port:

    Guangzhou
  • Lead Time:

    7-35days

CENTRIFUGAL AIR CURTAIN - STRONG AIR WALL

* All metal spraying with better fire prevention, corrosion resistance performance;

* New guide louver design is available so that the wind can be adjusted randomly to meet environment with different requirements for wind direction;

* Multiple control methods, such as manual switch, IR remote, magnet switch and door sensor, multiple control modes are available to satisfy different requirements at different places;

* Turbine impeller injection molded by ABS and glass fiber injection is characterized of high intensity and low noise;

* The unequal pitch and multi-blade rotor design is characterized of lower noise and smaller vibration;

* All pure copper wire motor at low temperature to ensure consistent running without failure;

* Professional air duct design can realize more silent effect and superior performance of the product;

* High-quality ball bearing to ensure motor running more smoothly and silent;

* Resettable thermal protection device will disconnect power when the product is at abnormal high temperature to avoid potential safety hazards to make the operation more safe;

* Start up at 100V ultra-low voltage which is more convenient in operation;

* Enclosure class IP44 

* Insulation class E

 

Product Model:

Model Spec.(mm) Voltage Freq. Input power Air speed(m/s) Air flow Noise Dimension
(V) (Hz) (W) High      Low CMH       CFM (dB) (mm)
FM3509B 900 110/220 50/60 250 16         13 1120       660 53 900x230x225
FM3510B 1000 110/220 50/60 280 16         13 1290        760 53 1000x230x225
FM3512B 1200 110/220 50/60 320 16         13 1430        842 54 1200x230x225
FM3515B 1500 110/220 50/60 400 16         13 1780     1048 56 1500x230x225
FM3509B-1Y 900 110/220 50/60 250 16         13 1120        660 53 900x230x225
FM3510B-1Y 1000 110/220 50/60 280 16          13 1290        760 53 1000x230x225
FM3512B-1Y 1200 110/220 50/60 320 16         13 1430      842 54 1200x230x225
FM3515B-1Y 1500 110/220 50/60 400 16         13 1780     1048 56 1500x230x225

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products
Low noise air curtains 0.9m
Low Noise High Velocity Air Curtains 0.9M
Air curtain is an air fresher equipment , to form an "invisible air door' by running of high speed motor with cross flow or centrifugal blower. It has been widely used in electronic , medicine making, food processing , precision processing , chemical , business areas and other industry. It can effectively isolate convection indoor and outdoor and keep temperature and humidity . Air curtains also called air door , air barrier etc.
View More
Air Curtain
Polar Low Temperature PVC Strip Curtain Roll
Standard type PVC strip curtain have good transparency. It can stop the loss of cold air or warm air effectively and prevent the invasion of dust and ultraviolet. PVC strip curtain also reduce the dB value of noise, constrain noise from spreading and noise pollution.
View More
air curtain
Commercial air curtain FM-3012B China Wholesale Air Curtain Industrial
CENTRIFUGAL AIR CURTAIN - STRONG AIR WALL* All metal spraying with better fire prevention, corrosion resistance performance;* Multiple control methods, such as manual switch, IR remote, magnet switch and door sensor, multiple control modes are available to satisfy different requirements at different places
View More
compressor
R407c refrigeration compressor with model 4TES-9(Y)
SEMI-HERMETIC For standard refrigerantsUniversal and environmentally friendly: ECOLINE reciprocating compressors offer high cooling capacity with minimal energy requirements and are optimised for HFC, HFO and low-GWP refrigerants. The optional VARISTEP mechanical capacity control offers high part-load efficiency in medium and low temperature application.
View More
CS ceilling unit evaporator
evaporator coil cooler one fan
evaporator coil cooler for cold storage  Fin space 6.4MM with high efficiency 500mm axial fan.
View More
Oil Separator
XMK-133 3/8 vertical Liquid Receiver Refrigeration
XMK-133 3/8 vertical Liquid Receiver Refrigeration The liquid receiver acts as a stock of liquid refrigerant for the evaporators, located after the condenser in a refrigeration system.The selection of receiver size should be based on refrigerant charge in the system, and it also should be sized to hold the full system charge during service work, the capacity of each liquid receiver listed on Technical data sheet below.ModelConnector sizeXMK-1333/8XMK-2333/8XMK-3333/8XMK-4441/2XMK-6441/2XMK-8441/2XMK-10555/8XMK-12555/8XMK-14555/8Production Introduction:1.Designed for refrigerant storage in system’s normal operation or maintaining.2.System adjustment is allowed to suit with different condition or loading.3.Compatible with HFC, CFC, CFC and associated oils and additives4. Assemble a high quality rotator valve or safety valve.
View More
XMK Condenser
Fin Type Evaporator Condenser And Evaporate
43.9KW Fin Type Evaporator  Product description:   HC series air cooled condensers are mainly equipped with open-type condensing units with scrollcompressor, hemertic & semi-hemertic compressor. This air cooled condensers and compressors canbe installed together or sepa rately from compressors .Design of High barrel with Side-mounted Structure.   1.Condensers and compressors can be installed together or separately from compressors. Design of Highbarrel with Side-mounted Structure.   2.Copper tube and corrugated aluminium fins with a distance of2.1 mm are used.   3.Fan specifications adopt φ400mm, φ500mm and φ630mm.   4.Testing pressure 32bar.   5.Adopt high-quality steel plate with powder coating RAL9003 or RAL6001.   6.It can meet the requirements of R22, R134a, R404A, R507A, R407A, R407C,R448A,R449A and other refrig-erants.   7.Retain 1.5bar pressure before leaving factory. HC Series Air Cooled Condenser Data Sheet:   Model HC98/440NT Capacity (KW) 43.9 Surface (㎡) 97.7 Volume (dm) 11.6 Fan Motor Air Flow 14000 Fan Motor Power 960 Fan Motor Current 2.08 dB (A) 56 Connect Pipe Inlet 28 Connect Pipe Outlet 22 Weight (kg) 75          
View More
CS ceilling unit evaporator
Air Cooler Unit For Low temperature Cold Room
CS one fan Upgraded Type Condenser Portable Air Cooler Evaporator For low temerature small Cold Room With Electrical Defrost.
View More
Categories

click here to leave a message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

about

contact