Condensing unit which widely used in hotels, restaurants, medicines, agricultural, chemicals industries all other place where cold storage is needed.

  • Refcomp Compressor
    Refcomp Compressor
    Refrigeration R404A Refcomp Water-cooled Condensing Unit
    Semi-hermetic Compressor Condensing Unit Product description:  XRW series semi-hermetic screw unit is mainly used in cold storage projects with large coolingcapacity requirements1.Adopts Refcomp SW3 series screw compressorwith single unit and parallel unit.2.The series of products include two applicationseries of medium-temperature and low-tem-perature units. The medium-temperature unitmainly meets the requirements of cold storageat about OC, while the low-temperature unitmainly meets the requirements of low-tem-perature refrigeration storage at -20C andquick-frozen storage at -35C.3.The standard design of the unit adopts theform of water cooling, adopts high efficientshell and tube type water cooling condenser,and is equipped with a separate liquid receiver.4.The low temperature unit is equipped with aneconomizer system and an oil cooler system.5.The unit is controlled by Siemens PLC and thekey electrical components are controlled bySchneider. With compressor start and stop,energy regulation, oil cooling system, econo-mizer system, cooling water pump and coolingtower fan control and various protection functions.6.The unit standard uses R404A or R507A refrigerant.Refcomp Condensing Unit Data: Power Supply  380V 50Hz 3phase Apply Temp. -5 to 5 degree Compressor Model SW3H6000 Compressor Max.I(A) 105 Capacity(-5℃) 120Capacity(-10℃) 98.2Capacity(-15℃) 79.7 Suction Line (mm) 28 Liquid Line (mm) DN50 Size length (mm) 1650 Size Width (mm) 1000 Size Height (mm) 1520
  • Refcomp Compressor unit
    Refcomp Compressor unit
    Screw Compressor Refcomp Water-cooled Condensing Unit
    Screw Refcomp Semi-hermetic Compressor Condensing Unit Product description:  XRW series semi-hermetic screw unit is mainly used in cold storage projects with large coolingcapacity requirements1.Adopts Refcomp SW3 series screw compressorwith single unit and parallel unit.2.The series of products include two applicationseries of medium-temperature and low-tem-perature units. The medium-temperature unitmainly meets the requirements of cold storageat about OC, while the low-temperature unitmainly meets the requirements of low-tem-perature refrigeration storage at -20C andquick-frozen storage at -35C.3.The standard design of the unit adopts theform of water cooling, adopts high efficientshell and tube type water cooling condenser,and is equipped with a separate liquid receiver.4.The low temperature unit is equipped with aneconomizer system and an oil cooler system.5.The unit is controlled by Siemens PLC and thekey electrical components are controlled bySchneider. With compressor start and stop,energy regulation, oil cooling system, econo-mizer system, cooling water pump and coolingtower fan control and various protection functions.6.The unit standard uses R404A or R507A refrigerant.Refcomp Condensing Unit Data: Power Supply  380V 50Hz 3phase Apply Temp. -5 to 5 degree Compressor Model SW3H7500 Compressor Max.I(A) 124 Capacity(-5℃)140.4Capacity(-10℃)115Capacity(-15℃)93.4 Suction Line (mm) 28 Liquid Line (mm) DN65 Size length (mm) 1920 Size Width (mm) 1000 Size Height (mm) 1620
  • Bitzer Compressor unit
    Bitzer Compressor unit
    Screw Compressor Bitzer Refrigeration Condensing Unit
    Screw Bitzer Semi-hermetic Compressor Condensing Unit Product description:  XBW series semi-hermetic screw unit is mainly used in cold storage projects with large coolingcapacity requirements.1.Adopts BITZER HSN series low screw compres-sor with single unit and parallel unit. It mainlymeets the requirements of low-temperaturerefrigeration storage at -20°C and quick-frozenstorage at -35°Cwith BITZER or FRASCOLD ,Ithas good quality and high reliability.2.The standard design of the unit adopts theform of water cooling, adopts high efficientshell and tube type water cooling condenser,and is equipped with a separate liquid receiver.3.The unit is equipped with an economizersystem and an oil cooler system.4.The unit is controlled by Siemens PLC and thekey electrical components are controlled bySchneider. With compressor start and stop,energy regulation, oil cooling system, econo-mizer system, cooling water pump and coolingtower fan control and various protection functions.tures;temperatures.5.The unit standard uses R404A or R507A refrigerant.Bitzer Condensing Unit Data: Power Supply  380V 50Hz 3phase Apply Temp. -18 to -40 degree Compressor Model HSN6461-50 Compressor Max.I(A) 79 Capacity(-35℃)46.7Capacity(-40℃)37.5Capacity(-45℃)29.5 Suction Line (mm) 28 Liquid Line (mm) DN50 Size length (mm) 1650 Size Width (mm) 1000 Size Height (mm) 1510
  • Danfoss Compressor Cooling Room
    Danfoss Compressor Cooling Room
    MLZ021 Scroll Compressor Condensing Unit R404
    MLZ21 Danfoss Scroll Compressor Condensing UnitProduct description:KCU/VCU series box-type scroll condensing units have the following characteristics.1.This series of products is mainly developed forcommercial and supermarket applications.2.The unit adopts Danfoss MLZ fixed frequencyor VLZ variable frequency scroll compressor.3.Air conditioning type case is adopted ,Adopted6-pcle low speed and low noise fan. It is verysuitable for residential area.4.The compressor and condenser can be dividedinto two cases according to the requirementsof customers.5.The unit is equipped with oil separator andaccumulator, unit control and fan speedregulation, etc. It is especially suitable forconvenience store and supermarket refrigera-tion system.6.The pressure control compressor starts andstops.7.With phase sequence, phase loss, over current,discharge temperature, system high and lowpressure protection and fault query functions.8.It can meet the requirements of R404A, R507A,R448A, R449A and other refrigerants.Danfoss MLZ021 Condensing Unit Catalogue: Power Supply  380V 50Hz 3phase Apply Temp. -18 to 5 degree Compressor Model MLZ021 Compressor Max.I(A) 9.5 Fan Voltage (V) 220V 50Hz single phase Fan Current (A) 0.68 Rev.(r/min)820 Suction Line (mm) 19 Liquid Line (mm) 12.7Weight75Noise dBA60
  • fish tank water chiller
    fish tank water chiller
    HX150S Industrial Water Cooled Chiller
    2.3m³Volume Water Chiller Seafood Product description:  The HX series of seasfood chiller developed by our factory, which designed into an overall com-pact structure with a beautiful and exquisite structure. It's including the condenser, titanium gunevaporator, various valves and control systems. Which can be directly used in fields such asseafood farming.1.The product can be wall-mounted or vertical,and the unit is installed on the ground and theside of the wall.of the storehouse body.2.The product can adjust the temperature of coldand warm water, and the water temperaturecanbe adjusted between 5 and 40 degrees.3.The product is fully automated and intelligentlycontrolled, with control functions such as watertemperature setting and control, constanttemperature setting and system operation protection.HX Series Seafood Chiller data: Power Supply  220V 50Hz 1phaseApply Water Temp. 5 to 26 ℃Model HX150SApply Water Volume(m³) 0.75-2.3 Input Power(KW) 1.3 Nominal Capacity(KW)3.9 Size length (mm) 650 Size Width (mm) 490 Size Height (mm) 600
  • fish tank water chiller
    fish tank water chiller
    HX300T Fish Tank Water Chiller
    7.5m³ Volume Fish Water Chiller  Product description:  PU series vertical box-type condension units have the following characteristics1. The product adopts vertical box-type structure, fan side installation, effectively prevent dust, rain water and Soon into the cabinet;2. High air duct design, low noise, beautiful appearance;3. The cover of the case adopts hinge structure, which is easy to maintain and operate;4. Compressor uses Emerson ZB and ZFI series scroll compressor or Bitzer semi-hermetic compressor to meet theapplication of medium tem perature and low temperature;5. Adopt U-type condenser, it has large windward side, small wind resistance and good heat transfer effect;6. It can meet the requirements of R22, R404A, R507A, R448A, R449A and other refrigerants.HX Series Seafood Chiller data: Power Supply  220V 50Hz 1phaseApply Water Temp. 5 to 26 ℃Model HX300TApply Water Volume(m³) 2.5-7.5 Input Power(KW) 4.4 Nominal Capacity(KW)14.4 Size length (mm) 980 Size Width (mm) 530 Size Height (mm) 1250
  • Refrigeration Compressor Units -XMK
    Refrigeration Compressor Units -XMK
    -15 to -35 Degree Low Temperature Freezer Outdoor Condensing Unit
    HCU series open-type air-cool condensing units  Product description:   1.HCU series open-type air-cool condensing units have the following characteristics.Adopted semi-hermetic piston compressors with BITZER or FRASCOLD, It has good quality and high reliability. 2.The air-cooled condenser, compressor and various accessories are installed on an integral frame, which is compact in structure and convenient in operation and maintenance. 3.Adopted high duct condenser with external rotor fan , which has low noise and high efficiency. 4.The product series is complete, It has high,medium, low temperature and quick frozen working conditions design. It can meet the needs of refrigeration equipment at various temperatures. 5.It can meet the requirements of R22, R404A,R507A, R448A, R449A and other refrigerants. Low Temperature  Condensing Unit Catalogue: Power Supply  380V 50Hz 3phase Apply Temp. -15 to -35degree Compressor Model Q5-33.1Y Compressor Max.I(A) 14.4 Fan Voltage (V) 380V 50Hz 3phase Fan Current (A) 0.92 Fan Power (W) 220X2 Suction Line (mm) 35 Liquid Line (mm) 16 Size length (mm) 1470 Size Width (mm) 800 Size Height (mm) 1465
1 ... 11 12 13

A total of 13 pages

Categories

click here to leave a message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

about

contact