XMK design WS series unit cooler is using water defrosting method , the defrosting time is short, and the little effect on cold room temperature. Sieve poretype defrosting water pan and inner & outer water baffles are used to prevent water spraying into cold storage and wind blades during defrosting.
Product Origin:
CHINAColor:
WhiteShipping Port:
GUANGZHOUProduct Description:
Casing：
Adopt high-quality steel plate with powder coating RAL9003；
Heat exchanger coil：
Copper tubingφ15,Spacing 50×50
Corrugated aluminium fins,fin spacing 4.2mm,6.4mm&9.0mm
Fans:
External rotor motor with high wind pressure, working temperature -40~60℃
High air duct design with Integral stretching, good ventilation effect, further airthrow, lower noise
Fans individually connected to junction box
Fan bladeφ400, φ500, φ630, standard 4-pole motor
Water Defrosting:
Using water defrosting method, the defrosting time is short, and the little effect on cold room temperature.
Sieve pore type defrosting water pan and inner & outer water baffles are used to prevent water spraying into cold storage and wind blades during defrosting.
It can meet the requirements of R404A, R507A, R448A, R449A, R134a, R22 and other refrigerants
Performance data sheet：
Remarks: 1). Tc is the coldroom temp., and ΔT is the diference between the coldroom temp. and the evaporation temperature.
2). Calculating of defrostting water flow: water inlet temperature 15 c and outlet temperature 5 c, defrost time 5 minutes.
Remarks: 1). Tc is the coldroom temp., and ΔT is the diference between the coldroom temp. and the evaporation temperature.
2). Calculating of defrostting water flow: water inlet temperature 15 c and outlet temperature 5 c, defrost time 5 minutes.
Outline&installation dimension:
Related Tags :
