HX Series Seafood Chiller

7.5m³ Volume Fish Water Chiller  Product description:  PU series vertical box-type condension units have the following characteristics1. The product adopts vertical box-type structure, fan side installation, effectively prevent dust, rain water and Soon into the cabinet;2. High air duct design, low noise, beautiful appearance;3. The cover of the case adopts hinge structure, which is easy to maintain and operate;4. Compressor uses Emerson ZB and ZFI series scroll compressor or Bitzer semi-hermetic compressor to meet theapplication of medium tem perature and low temperature;5. Adopt U-type condenser, it has large windward side, small wind resistance and good heat transfer effect;6. It can meet the requirements of R22, R404A, R507A, R448A, R449A and other refrigerants.HX Series Seafood Chiller data: Power Supply  220V 50Hz 1phaseApply Water Temp. 5 to 26 ℃Model HX300TApply Water Volume(m³） 2.5-7.5 Input Power(KW) 4.4 Nominal Capacity(KW)14.4 Size length (mm) 980 Size Width (mm) 530 Size Height (mm) 1250

2.3m³Volume Water Chiller Seafood Product description:  The HX series of seasfood chiller developed by our factory, which designed into an overall com-pact structure with a beautiful and exquisite structure. It's including the condenser, titanium gunevaporator, various valves and control systems. Which can be directly used in fields such asseafood farming.1.The product can be wall-mounted or vertical,and the unit is installed on the ground and theside of the wall.of the storehouse body.2.The product can adjust the temperature of coldand warm water, and the water temperaturecanbe adjusted between 5 and 40 degrees.3.The product is fully automated and intelligentlycontrolled, with control functions such as watertemperature setting and control, constanttemperature setting and system operation protection.HX Series Seafood Chiller data: Power Supply  220V 50Hz 1phaseApply Water Temp. 5 to 26 ℃Model HX150SApply Water Volume(m³） 0.75-2.3 Input Power(KW) 1.3 Nominal Capacity(KW)3.9 Size length (mm) 650 Size Width (mm) 490 Size Height (mm) 600

XMK design WS series unit cooler is using water defrosting method , the defrosting time is short, and the little effect on cold room temperature. Sieve poretype defrosting water pan and inner & outer water baffles are used to prevent water spraying into cold storage and wind blades during defrosting.  

MLZ038 Freezer Copeland Scroll Compressor Condensing UnitProduct description:GU series box-type scroll condensing units have the following characteristics.1.This series of products is mainly developed forcold storage applications.2.The unit adopts Danfoss or Emerson fixedfrequency scroll compressor.3.Air conditioning type case is adopted ,Adopted6-pole low speed and low noise fan. It is verysuitable for residential area.4.It can meet the requirements of R404A, R507A,R448A, R449A and other refrigerants.Danfoss MLZ038 Condensing Unit Catalogue: Power Supply  380V 50Hz 3phase Apply Temp. -18 to 5 degree Compressor Model MLZ038 Compressor Max.I(A) 15 Fan Voltage (V) 220V 50Hz single phase Fan Current (A) 1.36 Rev.(r/min)820 Suction Line (mm) 19 Liquid Line （mm） 12.7Weight97Noise dBA61

SEMI-HERMETIC For standard refrigerantsUniversal and environmentally friendly: ECOLINE reciprocating compressors offer high cooling capacity with minimal energy requirements and are optimised for HFC, HFO and low-GWP refrigerants. The optional VARISTEP mechanical capacity control offers high part-load efficiency in medium and low temperature application.

Middle temperature Cold Storage Evaporators with 630mm axial fan(two), can be used for the -18C~-25C  cold storage 

Air cooled condenser is specially designed for Freon refrigeration equipment and cooled by air. We have FNF, HC ,V type and LQF 4 sub series. FNF series is mainly equipped with open-type condensing units with scroll compressor,hemertic & semi-hemertic compressor.     

The GS series industrial glycol air coolers is mainly used for cooling equipment in cold storage with glycol coolant. The low temperature glycol aqueous solution in the heat exchanger tube of the air cooler to absorb the external heat so as to reduce the storage temperature. The GS series air cooler can be used in cold storage at about 10°C, 0°C and -18°C respectively.